Welcome to our websites!

Packing Machine

  • The movable groove spiral belt mixing machine

    The movable groove spiral belt mixing machine

    Horizontal spiral ribbon mixer is composed of spiral ribbon rotating parts;

    The outer spiral gathers materials from both sides to the center,

    The inner spiral conveys materials from the center to both sides to form convective mixing. The spiral ribbon mixer has a good effect on the mixing of viscous or cohesive powders and granules.

  • MX-2A/2B Automatic Filling Machine

    MX-2A/2B Automatic Filling Machine

    Suitable for jar tin

    50L side opening hopper,easey to clean

    Touch screen Display 2 language,easy to operate

    Position screw,connect with the filling machine,make it automatic and faster

    Electric control,we use famous brand,steady and easy to get when it is urgent

    Servo motor drive the auger which was processing with lathe

  • MX-3AL/3BL Automatic Vertical Bag Packaging Machine

    MX-3AL/3BL Automatic Vertical Bag Packaging Machine

    This is vertical form fill and seal machines which are very space-saving, designed for high performance (output) with reproducible sealing. All machines are fully automatic and designed in the Two-Mode-Tec design and operate intermittently and/or continuously. The design of the formats allows the production of tubular bags without and with gusset, block bottom bags and StabilPack bags, also tetrahedron bags or spherical bags. The wide variety of packaging shapes also requires individual forma...
  • MX-2B2 Filling Machine With feedback

    MX-2B2 Filling Machine With feedback

    Capacity:20-55 tin/min

    Work Model: one filling by auger & single weighting & reject

    Tin specification range:

    Diameter:50-180mm

    Height:50-350mm

    Filling Weight:10-5000g(By change auger’s diameter)

    Measuring Accuracy:≤±1%

    Hopper Volume:50L

    Total Weight:450Kg

  • MX-2B3 Automatic Auger filling machine

    MX-2B3 Automatic Auger filling machine

    Product Container: Columnar tin can: Diameter 50-180mm, Height 50-350mm

    Filling Weight: 10-5000g (By changing auger accessory)

    Packing Accuracy:≤±1.5g

    Packing Speed:20-55 tins/min.

    Total Power:3.5Kw

    Siemens PLC and touch screen, Panasonic servo motor

    Include one module 

  • pneumatic mixer

    pneumatic mixer

    pneumatic mixer is a three-in-one equipment integrating suction, mixing and sending functions. The whole machine is made of stainless steel, which is especially suitable for GMP certification, food hygiene certification, and mixing and conveying of products that require anti-corrosion chemical products.
    The BHQ series pneumatic mixer is a PLC touch screen interface, which has the advantages of stable work, anti-interference, convenient and intuitive operation, and the control parameters of each stage can be freely changed.

  • Gravity-free double-shaft paddle mixer

    Gravity-free double-shaft paddle mixer

    The non-gravity double-shaft paddle mixer has the characteristics of strong, high efficiency, short mixing time, design mixing time of 1-3 minutes, 1:1000 distribution ratio uniformity is greater than 95%, the two mixing shafts in the horizontal cylinder rotate in opposite directions at the same speed , The blades arranged at a special angle on the shaft ensure that the material is sprayed in the radial, circumferential and axial directions at the same time, forming a compound compound cycle, and achieving uniform mixing in a short time.

  • MX-1B3 Semi-automatic Auger filing machine

    MX-1B3 Semi-automatic Auger filing machine

    Model: BGL-1B3

    Measurement method: screw quantitative

    Filling weight::10-5000g

    Dosing way :auger filling

    Hopper volume : 50L

    Package accuracy :≤±0.3-1%

    Package speed :10-55 times/ minute

    Power supply:380v  50-60hz  /1.7kw

    Dimensions:800X1200X2150mm

    Include control system: touch screen, PLC and electrical box

    This equipment is semi-automatic equipment, air damping combined transparent material box, recyclable dust suction device lifting table, suitable for packaging powdered materials, such as milk powder, feed, rice flour, sugar, monosodium glutamate, solid beverages, glucose, solid medicine

  • MX-1A3  Semi-automatic  Auger filing machine

    MX-1A3 Semi-automatic Auger filing machine

    Filling weight::1-500g

    Dosing way :auger filling

    Hopper volume : 50L

    Package accuracy :≤±0.3-1%

    Package speed :10-55 times/ minute

    Power supply:380v  50-60hz  /1.7kw

    Dimensions:800X1200X2150mm

    Include control system: touch screen, PLC and electrical box

    MX-1B3  Semi-automatic  Auger filing machine  is semi-automatic equipment, air damping combined transparent material box, recyclable dust suction device lifting table, suitable for packaging powdered materials, such as milk powder, feed, rice flour, sugar, monosodium glutamate, solid beverages, glucose, solid medicine

  • MX-1C1 Semi-automatic big bag Auger filing machine

    MX-1C1 Semi-automatic big bag Auger filing machine

    Filling Range10~50kg

    Filling Method:Double screw,Double door

    Measurement Method:Gross Weight

    Capacity: ≤3bag/min

    Filling Capacity: ≤±0.2%

    Power:380V50~60HZ/3.9kw(Exclude air supply)

    Pressure/Air Consumption:6~8kg/cm2/0.2m3/min

    Total Weight/Overall Size:400kg/4000*1200*2400mm

  • Screw feeder

    Screw feeder

    230L Round/Square hopper,easy to clean
    Using double motors:feeding/vibrating motor,separately controlled.Double chint reverses switch,control the conveying and unloading of materials,separately controlled
    conveyor height and tube diameter can be custom by your require
    Product hopper is adjustable,avoid product blocking,suitable for different material
    Hopper can sepreate from the tube,easy assemmbly
    Special anti-dust design to protect bearing from dust
    Auger can be pull out for washing,very easy to clean